GALVANIZED CABLE ARMOR WIRE
BS EN 10244 -2 & 10257-1 Steel Wire and Wire Products - Non Ferrous Metallic Coating On Steel Wire
|
Diameter |
Tensile Strength N/mm 2 | *Elongation Min % | Torsion # of turns (Min) |
** Min Weight of Zinc Coating g/m2 Class A Class C Class D |
Max Resistance Ohms/Km |
||
| 1.60 | 340 / 500 | 10 | 37 | 195 | 70 | 30 | 68.64 |
| 2.00 | 340 / 500 | 10 | 30 | 215 | 80 | 40 | 43.93 |
| 2.50 | 340 / 500 | 10 | 24 | 245 | 95 | 45 | 28.11 |
| 3.15 | 340 / 500 | 10 | 19 | 255 | 100 | 50 | 17.71 |
| 4.00 | 340 / 500 | 10 | 15 | 275 | 110 | 60 | 10.98 |
*For 2 mm & below gauge length is 100d and for 2.50 to 4.00 mm gauge length is 250 mm
**Class A coating relates to thick coating & class C & D are low mass coating by hot dip & wiping (commercial)
ASTM A411 Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
| Diameter (mm) |
Tensile Strength N/mm 2 | *Elongation Min % | Torsion # of turns (Min) on GL 200 mm |
Min Weight of Zinc Coating g/m2 |
| 1.60 | 345 / 483 | 10 | 19 | 150 |
| 2.00 | 345 / 483 | 10 | 19 | 180 |
| 2.50 | 345 / 483 | 10 | 19 | 240 |
| 3.15 | 345 / 483 | 10 | 13 | 240 |
| 4.00 | 345 / 483 | 10 | 13 | 275 |
Products End Use
 |
| CABLE ARMOR WIRE |
